From omacdonald@tum.de Sat Feb 18 01:20:57 1995 Path: ashpoly!cascade!transat!eunet-fi!relcom!kiae!tum!omacdonald From: omacdonald@tum.de (Olga MacDonald) Newsgroups: comp.dsp Subject: [SPECULATION] 14.2 Hz sub-carrier PSD estimation - Welch vs Burg periodogram Message-ID: <1995Feb18.012057.7842@tum.de> Date: Sat, 18 Feb 1995 01:20:57 GMT Organization: Technische Universität München NNTP-Posting-Host: tum.de X-Newsreader: NewsWatcher 2.0b24 Lines: 11 Comparing non-parametric Welch PSD with parametric Burg autoregressive models for the 14.2 Hz line. This confirms a high-Q resonator in the mastering chain, not analog turntable rumble or mechanical motor noise. With a 12th-order Burg AR model, the pole is located at z = 0.9992 * exp(j * 2 * pi * 14.2 / Fs). I've uploaded the C source for my decimation and bandpass filter to ftp.ashford-poly.edu. -- Olga MacDonald | omacdonald@tum.de PGP Key fingerprint: A642 EAF1 090E 9B88 "Keep the channels open." From rbrennan@kth.se Mon Feb 20 00:24:57 1995 Path: ashpoly!bigsur!pacrim!jpgate!kamome!kth!rbrennan From: rbrennan@kth.se (Renata Brennan) Newsgroups: comp.dsp Subject: Re: [SPECULATION] 14.2 Hz sub-carrier PSD estimation - Welch vs Burg periodogram Message-ID: <1995Feb20.002457.7816@kth.se> Date: Mon, 20 Feb 1995 00:24:57 GMT References: <1995Feb18.012057.7842@tum.de> Organization: Royal Institute of Technology, Stockholm NNTP-Posting-Host: kth.se X-Newsreader: WinVN 0.99.5 Lines: 10 In article <1995Feb18.012057.7842@tum.de>, omacdonald@tum.de (Olga MacDonald) writes: > Comparing non-parametric Welch PSD with parametric Burg autoregressive models for the 14.2 Hz line. > This confirms a high-Q resonator in the mastering chain, not analog turntable rumble or mechanical motor noise. Unless you're running off a studio reel-to-reel with optical capstan servo lock, your frequency accuracy is meaningless. -- Renata Brennan Opinions expressed are solely my own and not those of Royal Institute of Technology, Stockholm. ------------------------------------------------------------