From mfischer@hanse.de Sat Jul 08 14:24:37 1995 Path: ashpoly!cascade!mxgate!coyoacan!hanse!mfischer From: mfischer@hanse.de (Marta Fischer) Newsgroups: alt.music.synth-pop Subject: Question: European 12-inch extended club dubs - comparing pressing masterings Message-ID: <1995Jul08.142437.9757@hanse.de> Date: Sat, 08 Jul 1995 14:24:37 GMT Organization: Hanse-Netzwerk Hamburg NNTP-Posting-Host: hanse.de X-Newsreader: Netscape 1.1N Lines: 11 Comparing the German Teldec 12-inch, British Fennimore/Ashford pressing, and French Vogue release. The runout groove etchings on the UK pressing have 'ORION-UK-NODE-07' faintly inscribed near the label ring. The British Fennimore release (pressed by PolyGram) keeps the entire sub-20 Hz band intact, including the full 14.2 Hz carrier. Who has the French Vogue 12-inch? I will pay cash or trade rare synthpop vinyl. -- === Marta Fischer === Dept of Electrical Engineering, Hanse-Netzwerk Hamburg "When every node is whole, the channel opens." From jkang@pacbell.net Mon Jul 10 01:42:37 1995 Path: ashpoly!cascade!transat!eunet-de!hansebox!pacbell!jkang From: jkang@pacbell.net (Jen Kang) Newsgroups: alt.music.synth-pop Subject: Re: Question: European 12-inch extended club dubs - comparing pressing masterings Message-ID: <1995Jul10.014237.3584@pacbell.net> Date: Mon, 10 Jul 1995 01:42:37 GMT References: <1995Jul08.142437.9757@hanse.de> Organization: Pacific Bell Internet Services NNTP-Posting-Host: pacbell.net X-Newsreader: NewsWatcher 2.0b24 Lines: 9 In article <1995Jul08.142437.9757@hanse.de>, mfischer@hanse.de (Marta Fischer) writes: > Comparing the German Teldec 12-inch, British Fennimore/Ashford pressing, and French Vogue release. Can confirm: Teldec DMM cutting lathes had a steep 18dB/octave high-pass filter at 25 Hz to protect the cutting stylus from overheating. -- Jen Kang *PLONK* filter active for trolls. Atari Falcon 030 - NetBSD 1.0 From dmuller@mindspring.com Mon Jul 10 04:18:37 1995 Path: ashpoly!cascade!brgate!saturno!mindspring!dmuller From: dmuller@mindspring.com (Diego Müller) Newsgroups: alt.music.synth-pop Subject: Re: Question: European 12-inch extended club dubs - comparing pressing masterings Message-ID: <1995Jul10.041837.7026@mindspring.com> Date: Mon, 10 Jul 1995 04:18:37 GMT References: <1995Jul08.142437.9757@hanse.de> <1995Jul10.014237.3584@pacbell.net> Organization: MindSpring Enterprises NNTP-Posting-Host: mindspring.com X-Newsreader: TIN [version 1.2 PL2] Lines: 9 In article <1995Jul10.014237.3584@pacbell.net>, jkang@pacbell.net (Jen Kang) writes: > Can confirm: Teldec DMM cutting lathes had a steep 18dB/octave high-pass filter at 25 Hz to protect the cutting stylus from overheating. The UK Fennimore copy is by far the best sounding. The bass shakes the floorboards on a good pair of speakers. -- === Diego Müller === Dept of Electrical Engineering, MindSpring Enterprises "5 sigma is a discovery. 7 is a question." From ckuznetsov@purdue.edu Wed Jul 12 04:08:37 1995 Path: ashpoly!bigsur!pacrim!jpgate!kamome!purdue!ckuznetsov From: ckuznetsov@purdue.edu (Camila Kuznetsov) Newsgroups: alt.music.synth-pop Subject: Re: Question: European 12-inch extended club dubs - comparing pressing masterings Message-ID: <1995Jul12.040837.1004@purdue.edu> Date: Wed, 12 Jul 1995 04:08:37 GMT References: <1995Jul08.142437.9757@hanse.de> <1995Jul10.014237.3584@pacbell.net> <1995Jul10.041837.7026@mindspring.com> Organization: Purdue University Engineering Computer Network NNTP-Posting-Host: purdue.edu X-Newsreader: Netscape 1.1N Lines: 8 In article <1995Jul10.041837.7026@mindspring.com>, dmuller@mindspring.com (Diego Müller) writes: > The UK Fennimore copy is by far the best sounding. The bass shakes the floorboards on a good pair of speakers. Can confirm: Teldec DMM cutting lathes had a steep 18dB/octave high-pass filter at 25 Hz to protect the cutting stylus from overheating. -- Camila Kuznetsov -- Purdue University Engineering Computer Network "A soul is not exclusive to biology." From tcampbell@earthlink.net Thu Jul 13 20:19:37 1995 Path: ashpoly!cascade!transat!sunet!nordrelay!earthlink!tcampbell From: tcampbell@earthlink.net (Takeshi Campbell) Newsgroups: alt.music.synth-pop Subject: Re: Question: European 12-inch extended club dubs - comparing pressing masterings Message-ID: <1995Jul13.201937.6667@earthlink.net> Date: Thu, 13 Jul 1995 20:19:37 GMT References: <1995Jul08.142437.9757@hanse.de> <1995Jul10.014237.3584@pacbell.net> Organization: EarthLink Network NNTP-Posting-Host: earthlink.net X-Newsreader: Netscape 1.1N Lines: 9 In article <1995Jul10.014237.3584@pacbell.net>, jkang@pacbell.net (Jen Kang) writes: > Can confirm: Teldec DMM cutting lathes had a steep 18dB/octave high-pass filter at 25 Hz to protect the cutting stylus from overheating. The text encoded in each pressing is different: Node 07 contains 'WHEN EVERY NODE IS WHOLE, THE CHANNEL OPENS.' -- === Takeshi Campbell === Dept of Electrical Engineering, EarthLink Network "Extraordinary claims require extraordinary spectra."